Sunday, 29 November 2020

Jext Telez White Pedal

 


ETI Fuzztone

 Designed by Dan Coggins (Lovetone and Dinosaural). Despite its name it is more like an overdrive with asymmetric soft clipping and a tone control that pans between a low pass filter and a voltage divider.


Boss PW-2 Power Driver

 *Update 221110*

Corrected two resisor values and Zener diode values according to the a new schematic.


 


Saturday, 21 November 2020

Boss MT-2 Metal Zone

 


 
 

 
 
And since this is a circuit that is popular mod platform, here is the layout with component numbers that matches the factory schematic so you can easily identify which component to sub when following mod suggestions online.
 
EDIT! 201217 
Elijah-Baley have created a great mod sheet! LINK!
So now you can socket the whole board and modify it to your taste. :o)
Demo clip of MTKs build.

 


 

Boss BD-2 Blues Driver

 


Friday, 20 November 2020

Boss SP-1 Spectrum

 A fairly rare old Boss eq pedal which is rarely cloned due to the dual 10kA/10kC Balance control. However, it is quite easy to make your own if you have a dual 10kA pot and a single 10kA pot on hand. Custom pot tuturial and schematic is avaiable HERE

 

 




Boss FA-1 FET Amplifier

 Slightly modified, subbing the two single op amps of the original to a dual. 1458 or 4558 should match the spec of the original ones.



Thursday, 19 November 2020

Dinosaural OPA-101 Overdriven Pre Amp

 Just traced by Aion Fx as their Ixuea project. This layout is slightly modified compared to the original pedal. First, stock units had a fixed low pass filter before the volume control. The resistor in the filter is now replaced by an external tone control. Secomd, it is wired for true bypass with the input buffer hardwired.