Friday, 22 March 2024

1776 Effects RE-20 stripped down

 Here is another great layout by Sebastian!

In his own words...

Just wanted to share a layout I did of the RE-20 circuit from the 1776 Multiplex Echo Machine. It seemed like there aren't a lot of options for delay effects with parallel, independent delay controls. For the sake of simplicity (and a layout that would fit in anything smaller than a shoebox), I haven't included either the speed-ramp circuit from the original Multiplex, or the modulation circuit from the Multiplex Jr.


 

Jok3rx Blacker Forest - Bogner Ubershall Emulator

 Schematic is avaiable HERE.



Tuesday, 19 March 2024

Devi Ever God Zilla

 Another Devi dual pedal. This is basically a Vintage Fuzz Master going into Goddess Zero, so this is two unruly octave up fuzzes in this layout.



Monday, 18 March 2024

Saturday, 16 March 2024

Intersound The Notch

Schematic is avaiable HERE.



Fulltone PlimSoul

 Schematic is avaiable HERE.

Note that it is highly recommended to use a 10k pot for Sustain to avoid noise and dead spots in the sweep.



Thursday, 29 February 2024

Dead Air Face Disaster

 Phew, February has been a wild month here on the blog so lets end it with a BANG. This one is based on Tim Escobedo's DIY classic, Ugly Face with quite a few added bells and whistles such as a optical LFO section, separate starve control for two of the chips and some tweaked values here and there.

Schematic is avaiable HERE.



Wednesday, 28 February 2024

EarthQuaker Devices Dream Crusher

 Traced by Unsound Circuitry, once again, thanks, mate!

It is a well known fact that this is a modified Ge Fuzz Face. The stock Fuzz control is ditched and replaced with a "Pre Gain2 control. It runs on normal power supply and is powered by soviet MP37B NPN  germanium transistors. These are usually faily low gain and the current leakage is low. The bias trimpot is placed on the side of the board for easy moddong for an external bias pot.