Friday 21 June 2019

God City Instruments Brutalist Jr.

Two new layouts which both is verified. One with stock circuit and one with "Response mod" which is similar to the "Reutz mod" for Proco Rat.
For more overall gain on tap you can increase 4,7k resistor to 8,2k-12k.

Stock circuit




With Response mod




on
Labels: , , ,

7 comments:

  1. Tom134922 February 2020 at 16:07

    Hey ,
    Just started to build it and saw that it mentioned 10 links , but I see 11 .
    Is there another link in row 6 near the 1uf capacitor as well?

    ReplyDelete
    Replies
    1. fuzzhead22 February 2020 at 19:44

      Yes thats correct. Updated the layout with corrected label. Thanks for the heads up. I really like this one, one of my favorites.

      Delete
  2. Tom13494 April 2020 at 12:44

    Thanks to you for the layout!

    ReplyDelete
  3. jameso)))23 November 2020 at 12:12

    This comment has been removed by the author.

    ReplyDelete
    Replies
    1. jameso)))23 November 2020 at 12:27

      This comment has been removed by the author.

      Delete
  4. Mr Pinball8 April 2023 at 11:03

    I've been eyeing this one for a while and justing getting round to it now. For the response pot, I've only a 5kC to hand at the moment. If I were to use this instead will is make a massive difference?

    ReplyDelete
    Replies
    1. Orion Tonehunt8 April 2023 at 17:43

      If you tack a 1k5 resistor across lugs 1 and 3 of a 5k pot it should give you about 1k. Something to keep in mind if you try the 5k and it's too much. The sweep might be bunched up somewhere in the pot rotation, but it usually works fine in a pinch.

      Delete

Subscribe to: Post Comments (Atom)