One more correction. The feedback resistors L3-R3 (4.7) and L4-P4 (3.3) should be shifted with each other. 4.7 should be 3.3 and the other way around. Otherwise the sound will be trebly and with less bass than intended.
David, thank you for the correction. I had an 18x19 board lying around and looked for something interesting to build today. After reading your comment regarding the resistors, I studied the schematic and came to the same conclusion. I just finished building the pedal, and I am quite pleased. Lots of gain and grit, and a very useful tone control. This one will get boxed tomorrow!
Correct me if I'm wrong, but shouldn't R12 (1M) go from IC2/Pin3 to VCC? It looks like it's going to VREF.
ReplyDeleteThanks for spotting that. The layout is updated.
DeleteTag it! Sounds great.
ReplyDeleteJust one correction. Should be a 5kA for the Level
DeleteThanks for catching that. Tagged as verified.
DeleteOne more correction. The feedback resistors L3-R3 (4.7) and L4-P4 (3.3) should be shifted with each other. 4.7 should be 3.3 and the other way around. Otherwise the sound will be trebly and with less bass than intended.
ReplyDeleteThis comment has been removed by the author.
DeleteThis comment has been removed by the author.
DeleteDavid, thank you for the correction. I had an 18x19 board lying around and looked for something interesting to build today. After reading your comment regarding the resistors, I studied the schematic and came to the same conclusion. I just finished building the pedal, and I am quite pleased. Lots of gain and grit, and a very useful tone control. This one will get boxed tomorrow!
ReplyDeleteGreat!
Delete