This layout is 100% verified, sounds really good. I built it with the following changes/parts (because it's what I had at hand): - Tayda LDR and 5mm diffused led - TL061 - BC548Cs - 100R, 220R, 5.1KR resistors - used 2 pots for tone (B25k) instead of the dual gang (this is quite useful) - switched volume pot to log taper, since it has a lot of volume on tap.
Overall I'm very satisfied with this build, thank you for the layout!
This layout is 100% verified, sounds really good. I built it with the following changes/parts (because it's what I had at hand):
ReplyDelete- Tayda LDR and 5mm diffused led
- TL061
- BC548Cs
- 100R, 220R, 5.1KR resistors
- used 2 pots for tone (B25k) instead of the dual gang (this is quite useful)
- switched volume pot to log taper, since it has a lot of volume on tap.
Overall I'm very satisfied with this build, thank you for the layout!
Thank you Pedro!
DeleteSorry that I missed your post but it is now tagged.
Diodes D1 and D2 are inverted, anodes goes to ground and C8 (22uf in column 3) should connect somewhere on row Q.
DeleteYup, much better.
Delete