Verified. Can shape the tone with it and boost/cut frequencies to add some personality to your tone. A bit non intuitive when playing with the frequency pots, but one can get used to it. Also a bit of hiss when maxing freq 2 pot. Cheers.
some corrections are needed for this boy to work: 1.move level11+21 to j1 2.move 10k from m10 to k13 3.unpin 33n at l14 and add 1k in series to k14 4.level13+23 to k14 5. move 1k6 from t23 to u23 6.4k7 at 14e-h is 47k on schematic.
Hi @fuzzhead , I was looking for a way to contact you, but could not find anything else except comments. I think you use DIYLC for drawing the layouts, but mine come up with different colors, shapes of cuts etc. Do you use some older rendition? Or some other program? I was planning to redraw this project to cover the comments from crissip and then send it back, but not sure how that would work or look. Cheers
Verified. Can shape the tone with it and boost/cut frequencies to add some personality to your tone. A bit non intuitive when playing with the frequency pots, but one can get used to it. Also a bit of hiss when maxing freq 2 pot. Cheers.
ReplyDeleteDaum! This is quite a monster.
DeleteThanks a lot!
I'll tag it ASAP.
some corrections are needed for this boy to work:
ReplyDelete1.move level11+21 to j1
2.move 10k from m10 to k13
3.unpin 33n at l14 and add 1k in series to k14
4.level13+23 to k14
5. move 1k6 from t23 to u23
6.4k7 at 14e-h is 47k on schematic.
Cheers.
Thanks!
DeleteI'll sit down with the schematic and adjust the layout.
Will send an update once it is done.
Is the published version the updated layout?
DeleteNo, but crissip’s changes will make it work?
ReplyDeleteAny thoughts on where to find/get W50k pots?
ReplyDeleteHi @fuzzhead , I was looking for a way to contact you, but could not find anything else except comments.
ReplyDeleteI think you use DIYLC for drawing the layouts, but mine come up with different colors, shapes of cuts etc. Do you use some older rendition? Or some other program?
I was planning to redraw this project to cover the comments from crissip and then send it back, but not sure how that would work or look.
Cheers