Tuesday 27 August 2019

Crazy Tube Ziggy OD V1




13 comments:

  1. Just build this one, all the controls are working but the pedal sounds like a gated fuzz. You can only hear it on the transients. Double checked everything

    ReplyDelete
    Replies
    1. Hmm, checked the layout and can't spot any errors....:-(

      Delete
    2. Allright thanks for looking anyway :) I guess there must be a faulty component or something. I've build this testbox (from tagboardfx) with a probe bananapluginput but I don't really know how to use it.

      Delete
    3. If I'm reading it correctly, it looks like there is 1M resistor in the top left that is connected to the Gate on both ends, whereas one end should be connected to the drain.

      Delete
    4. This goes beyond my knowledge :P

      Delete
    5. The two 1M resistors at the top left... the one on the left, move the top one row up. The one on the right, move both ends of the resistor one row down. I think that's the quickest fix.

      Delete
    6. Sorry, top right. Wow, what is wrong with me!

      Delete
    7. I cannot test it on a good volume right now but I think that it's working as it should now! Will verify it tomorrow, thx Michael

      Delete
    8. Okay with Michael's corrections it is veryfied! Reacts really marshall-like. More gain introduces more low end, it sounds great!

      Delete
  2. I hope someone can help me out :P @Fuzzhead, can I request a layout for this pedal https://effectslayouts.blogspot.com/2017/05/crazy-tube-circuits-starlight.html I was really impressed by this one when testing it out.

    ReplyDelete
    Replies
    1. I have an unfinished layout at home. I'll try to finish it during the nextcoming weekend when I get home.:-)

      Delete
    2. That would be great! Really impressed with these pedals, the ones with build-in tubes are also really nice sounding.

      Delete
    3. Michael and Alex! Thanks for sorting it out. The layout is now corrected and tagged. :-)

      Delete