This "works" but not correctly. According to existing schematics, the 18k resistor has one end connected to base of Q2 and the other end connected to emitter. It doesn't connect in this layout so Q2 never really turns on due to lack of voltage at emmiter.
Built this. Used Russian P416B germanium PNP. Works good.
ReplyDeleteThis "works" but not correctly. According to existing schematics, the 18k resistor has one end connected to base of Q2 and the other end connected to emitter. It doesn't connect in this layout so Q2 never really turns on due to lack of voltage at emmiter.
ReplyDeleteAdd a column between 7 and 8 and jump row A to G and then I think it is working correctly.
ReplyDeleteThe18k is feeding Q1, but the Mood pot connected to the 2k/39k and the Range switch is the one feeding Q2?
ReplyDelete