In case anyone is looking to up the bass and gain from this circuit, replace the input cap to 100n, the cap above the IC to 470n, the 2.2uf electrolytic to 10uf, and the 10k resistor to 1k. Most of the lows roll off at 150Hz stock and these mods give a roll off at about 33Hz if you tune low. I also took the tone cap down to 4.7n due to it feeling a bit useless from noon and down.
Tag this one
ReplyDeleteI built good sound I am using lf353p opamp I like it, it has good sustain
I will add an on/ off/ on to toggle between led and Diodes
Thank you
Awesome! Thanks for verifying!
DeleteIn case anyone is looking to up the bass and gain from this circuit, replace the input cap to 100n, the cap above the IC to 470n, the 2.2uf electrolytic to 10uf, and the 10k resistor to 1k. Most of the lows roll off at 150Hz stock and these mods give a roll off at about 33Hz if you tune low. I also took the tone cap down to 4.7n due to it feeling a bit useless from noon and down.
ReplyDelete