Hey Fuzzhead, this is seriously one of these coolest muff variants. I have a butt ton of 1/2 watt resistors from various projects, is it possible to make a longwise mojo layout on this one like you did on a couple of the rams head variants? (If you have time)
Dude! Thanks so much!!! Now I have finally a use for all the 1/2 Watt resistors without having to squeeze them on a smaller board. Again, much appreciated!
Hey Fuzzhead, hope you're well. (As always of course). I'm not sure if you have tried the larger mojo layout, but just finally built it but dont seem to be getting any effect. Some noise when I turn the pots, but nothing else seems to work so far. Ill definitely double check over everything, but nothing seemed out of place. However, I still could have overlooked something
Oops I Went a bit fast with this one. Easy fix though. Add a cut at column 27. It should be located AT the row under the emitter of Q4. Volume 3 connection should be also be moved Downey one row. Hope that helps!
Thanks man! So, I noticed one more thing which might help. Seems to be a cut missing just above the 500pf cap in column 22, next to the 12K reaistor. Its present in your other long mojo layouts but just seems to be omitted here. At any rate, I really just appreciate you taking the time to respond.
So in short, the layout is actually fine. Just one cut missing and one cap out of place. Shift the cap on Q4 up one whole spot and add a cut there where I mentioned on column 22 and bam done.
Hey Fuzzhead, this is seriously one of these coolest muff variants. I have a butt ton of 1/2 watt resistors from various projects, is it possible to make a longwise mojo layout on this one like you did on a couple of the rams head variants? (If you have time)
ReplyDeleteI'll upload a wide mojo layout for this one tomorrow. Stay tuned!
DeleteMan, thanks buddy! As always thank you again for all the work you do!
DeleteMOJo layou is up!
DeleteDude! Thanks so much!!! Now I have finally a use for all the 1/2 Watt resistors without having to squeeze them on a smaller board. Again, much appreciated!
DeleteHey Fuzzhead, hope you're well. (As always of course). I'm not sure if you have tried the larger mojo layout, but just finally built it but dont seem to be getting any effect. Some noise when I turn the pots, but nothing else seems to work so far. Ill definitely double check over everything, but nothing seemed out of place. However, I still could have overlooked something
DeleteOops I Went a bit fast with this one. Easy fix though. Add a cut at column 27. It should be located AT the row under the emitter of Q4. Volume 3 connection should be also be moved Downey one row. Hope that helps!
DeleteNo worries! Appreciate it. Also, Is the 100nf cap at Q4 supposed to be at the collector as well? Thanks again!
DeleteYes, top leg at the collector.
DeleteThanks man! So, I noticed one more thing which might help. Seems to be a cut missing just above the 500pf cap in column 22, next to the 12K reaistor. Its present in your other long mojo layouts but just seems to be omitted here. At any rate, I really just appreciate you taking the time to respond.
DeleteI ended up moving the 100nf cap up a spot, and outting in a cut at column 22 and now everythng works! Didnt have to move volume 3 or anything luckily.
ReplyDeleteSo in short, the layout is actually fine. Just one cut missing and one cap out of place. Shift the cap on Q4 up one whole spot and add a cut there where I mentioned on column 22 and bam done.
ReplyDeleteThis comment has been removed by the author.
Delete