Verify it. Fired up first try. Definitely a fuzz face relative. Sounds pretty good though. Has a fair amount of boost to it. Easy build is always a nice break too! Thanks for the layout dude!!!
according the schematic the 100nf should be 10nf and there should be a 100 ohm resistor between pin 1 of volume pot and ground . should sound thinner with the 10nf i guess
Back with a mutant green look. Input seems to be missing at 14, G. That's a big input cap for a Fuzz Face.
ReplyDeleteIt was about time to update the DIYLC...
ReplyDeleteInput label added.
I thought copper tracts had corroded like the Statue of Liberty from where you had been gone so long. :-)
DeleteVerify it. Fired up first try. Definitely a fuzz face relative. Sounds pretty good though. Has a fair amount of boost to it. Easy build is always a nice break too! Thanks for the layout dude!!!
ReplyDeleteAwesome!
DeleteTagged.
according the schematic the 100nf should be 10nf and there should be a 100 ohm resistor between pin 1 of volume pot and ground . should sound thinner with the 10nf i guess
ReplyDeletesounds great!
ReplyDelete