Finally managed to get it working. Layout has several errors and you'll need to remove a link, change position and colspan on another three ones, a new cut, and you'll have to wire another ground (as is imposible to link it in the layout. Tonight i'll try to write all the needed changes. In the while, all errors are on IC2 and IC3 right sides.
Needed changes: 1. New cut on F-9 2. Link from B12-G12 has to be B12-F12 3. Link from F13-N13 is now G13-N13 4. Link D15-F15 is now D15-G15 5. Cap 100nf C17-F17 changes to C17-G17 6. Resistor 470k from N-20-Q20 is now M20-Q20 7. Link K19-P19 can be remove. 8. Add a new ground wire on O1 (or another ground stripe if you prefer. After this changes, you can tag it. See you soon!
Hi, I suppose M1 is the Input !
ReplyDeleteNo, at K1...
DeleteThanks, stupid me 😅
DeleteDefintely, o need a batch of 4046....
ReplyDeleteFinally managed to get it working. Layout has several errors and you'll need to remove a link, change position and colspan on another three ones, a new cut, and you'll have to wire another ground (as is imposible to link it in the layout. Tonight i'll try to write all the needed changes. In the while, all errors are on IC2 and IC3 right sides.
ReplyDeleteNeeded changes:
ReplyDelete1. New cut on F-9
2. Link from B12-G12 has to be B12-F12
3. Link from F13-N13 is now G13-N13
4. Link D15-F15 is now D15-G15
5. Cap 100nf C17-F17 changes to C17-G17
6. Resistor 470k from N-20-Q20 is now M20-Q20
7. Link K19-P19 can be remove.
8. Add a new ground wire on O1 (or another ground stripe if you prefer.
After this changes, you can tag it.
See you soon!
Thank you Javi for spotting and correcting all my messups S-/
DeleteThe layout is updated with an extra row for ground. And tagged.
You"re welcome! Nice solution with the extra row, greets!
ReplyDelete