Also since you have done a lot of Baja 's schematics i was interested in this : https://www.freestompboxes.org/viewtopic.php?t=29467&start=40 I have built rev 4 and it didn`t work very well and last summer Baja did rev5 and i`m curious to pair it with the Condor speaker sim i did (with the Marshall mod) http://runoffgroove.com/condor.html . If it`s of any interest to anyone else... Thanks again!!
Correct me if I'm wrong but 100R from IC1 6's pin is misplaced, it looks like it in series with 4.7uF cap which comes afterwards. I really should be in series with Drive 1 and then be parallel with 1nF capacitor
You can tag it as verified sounds good but not very interesting or different from other high gain pedals. The only interesting thing is the wide range of High/Low knobs that way you can deal variety of tones.
For those who wants to built take note of my previous comment above about placement of 100R if the schematic is not fixed, otherwise skip it.
Just so you are aware, the administrator of this blog is one person who does this as a hobby, in their spare time. If any drawings have not been updated or marked as verified or such, it is because Anders is most likely busy with real life stuff. Just so you know.
Hi would you mind making a layout for boss ce-1? I know you've already did one for ce-2, but I find ce-1 way cleaner and more ear pleasant. My best regards.
Happy new year!!! I hope you had a nice holiday!! Thanks!!!
ReplyDeleteAlso since you have done a lot of Baja 's schematics i was interested in this : https://www.freestompboxes.org/viewtopic.php?t=29467&start=40
ReplyDeleteI have built rev 4 and it didn`t work very well and last summer Baja did rev5 and i`m curious to pair it with the Condor speaker sim i did (with the Marshall mod) http://runoffgroove.com/condor.html
. If it`s of any interest to anyone else... Thanks again!!
Oh dude, there’s interest. Can’t believe I’ve never come across this build, we love the baja
DeleteDo I really need the 8u2 inductor on the input or can I leave it out?
ReplyDeleteThis comment has been removed by the author.
DeleteYou can, it’s purpose is to filter RF interference?
DeleteWith 1M resistor to ground makes a LC low pass filtering for very freq noise (19418.9839988 MHz).
ReplyDeleteCorrect me if I'm wrong but 100R from IC1 6's pin is misplaced, it looks like it in series with 4.7uF cap which comes afterwards. I really should be in series with Drive 1 and then be parallel with 1nF capacitor
ReplyDeleteYou can tag it as verified sounds good but not very interesting or different from other high gain pedals. The only interesting thing is the wide range of High/Low knobs that way you can deal variety of tones.
ReplyDeleteFor those who wants to built take note of my previous comment above about placement of 100R if the schematic is not fixed, otherwise skip it.
So the 100r should connect to pin 7 of the ic so it's in parallel with the 1nf correct?
DeleteThis comment has been removed by the author.
ReplyDeleteCan the schematic be updated please as per the comments?
DeleteJust so you are aware, the administrator of this blog is one person who does this as a hobby, in their spare time. If any drawings have not been updated or marked as verified or such, it is because Anders is most likely busy with real life stuff. Just so you know.
DeleteWhile you are patiently waiting for Anders to update his drawing, here's something you can build in the meantime.
DeleteIt's a mute button.
https://capitalistdeathculteffects.blogspot.com/2025/01/boooooring-totally-useful-utility.html?m=1
Tools, tools everywhere!
DeleteHi would you mind making a layout for boss ce-1? I know you've already did one for ce-2, but I find ce-1 way cleaner and more ear pleasant. My best regards.
ReplyDelete