Friday 16 July 2021

Mellowtone Singing Tree OD

 



13 comments:

  1. Fired right up with no problems, nice work!!!

    ReplyDelete
  2. I know this is marked as verified but the gain pot connections are reversed on the layout, correct?

    ReplyDelete
    Replies
    1. I don't know. There was no lug numbering in the schematic. I think Wierd(er) have to confirm this.

      Delete
  3. the gain pot is indeed wired backwards according to the layout. I kept it that way, to change it you'd just switch the double connection to lug 2&3 right?

    ReplyDelete
    Replies
    1. Thanks for confirming this. layout is updated.

      Delete
  4. Is there a schematic for this one.?

    ReplyDelete
  5. I'm slowly putting this one together. Coming from a place of complete ignorance, I'm wondering if it's based on an Electra?

    ReplyDelete
  6. It is an Electra, the gain is changing the bias on the collector. You might get scratching and popping from the gain knob, since it is actually touching the dc current. Really though, there are two basic single transistor boost stages you'll see, the two transistor biased stage like the lpb1, and the feedback resistor like the Electra (the Big Muff actually uses both types at different stages.

    ReplyDelete
  7. https://youtu.be/M2BRmsaqYkw

    Here it is. Sounds great. A bit more hairy than the speaker cranker. The controls are very vague and not doing much. Could easily be a one knob pedal.

    Thank you! ๐Ÿ˜Š๐Ÿ˜Š๐Ÿ˜Š

    ReplyDelete
    Replies
    1. Yeah, I was thinking that looking at the knobs before and after the diodes. It's like the 'close door' buttons on elevators.

      Delete
    2. The buttons on elevators probably do more
      (Except the ones at hotel Cecil)

      Delete