Yesterday I built this project, and I was able to realize that it has a small error in the lower left corner, because as the layout is, a delay is generated in the chorus signal. Based on the original schematic: I moved the 2K resistor pin that goes to S,3. I connected it to ground in T,3 and installed a jumper from P,1 to S,3 and it worked perfectly.
Yesterday I built this project, and I was able to realize that it has a small error in the lower left corner, because as the layout is, a delay is generated in the chorus signal. Based on the original schematic: I moved the 2K resistor pin that goes to S,3. I connected it to ground in T,3 and installed a jumper from P,1 to S,3 and it worked perfectly.
ReplyDeleteDo you have update schematics on this
DeleteBuilt and sounds great with the correction from BT
ReplyDeleteI just put this together, but I'm not sure it's a keeper for me...
ReplyDeletehttps://youtu.be/cO6DPpX0-eQ