As the layout currently stands there's an error. The 1M resistor connected to the input should connect to ground, but it's currently connected to VREF. This was giving me about 4V DC on the tip of my input jack. I fixed it by moving the connection at K3 to O2. A neater solution would be to switch around the link and capacitor above then connect to J3. Also note the cut at N13, it took me far too long to find that.
Welcome back! Thanks!!!
ReplyDeleteAll working. You can tag this verified.
ReplyDeleteThanks crissip.
DeleteTagged
I'm quite intrigued by this one and considering adding it to my wishlist. How does it sound? Is there anything about it that makes it stand out?
Deletehttps://www-vocu-jp.translate.goog/products/HBOD/HBOD.htm?_x_tr_sch=http&_x_tr_sl=auto&_x_tr_tl=en&_x_tr_hl=nl&_x_tr_pto=wapp
DeleteOverdrive with low and high voltage modes that
Deleteactively utilizes the characteristic changes caused by voltage changes
As the layout currently stands there's an error. The 1M resistor connected to the input should connect to ground, but it's currently connected to VREF. This was giving me about 4V DC on the tip of my input jack. I fixed it by moving the connection at K3 to O2. A neater solution would be to switch around the link and capacitor above then connect to J3.
ReplyDeleteAlso note the cut at N13, it took me far too long to find that.