Wednesday 2 December 2020

Catalinbread SFT V1

 




on
Labels: , , ,

15 comments:

  1. Unknown4 December 2020 at 03:41

    Hi Fuzzhead. The input connects to R1,not to T1.What scheme is the layout based on?.Thanks.

    ReplyDelete
    Replies
    1. fuzzhead4 December 2020 at 05:15

      It is basded on this schematic.
      https://aionfx.com/app/files/docs/artemis_mki_documentation.pdf

      Delete
    2. Unknown5 December 2020 at 06:10

      Thanks Fuzzhead.The source resistor of Q4 is 22k,not 2k.Regards.

      Delete
    3. fuzzhead5 December 2020 at 09:18

      hi there-
      Are you sure? I read 2k (R10) at the source of Q4.

      Delete
    4. Unknown5 December 2020 at 15:53

      Hi.You are right,the value of R10 is 2k.

      Delete
  2. Unknown5 December 2020 at 20:00

    Hi.The layout is ok,it works correctly and it is verified.

    ReplyDelete
  3. marios rappas7 December 2020 at 21:33

    Hello fuzzhead again ,, I want to send you a layout of noise gate but I don’t know where I send to you , so I send from here ,, I make a simple and cheap diagram of noise gate , and it works pretty nice .. if you you want check it .
    http://guitar-fx-layouts.42897.x6.nabble.com/file/n49518/C0E4BA94-547C-4C5C-85AB-69003693D701.jpeg

    ReplyDelete
    Replies
    1. fuzzhead8 December 2020 at 18:05

      Hey Marios!
      You don't happen to have a real schematic of the noise gate you linked to?

      Delete
    2. marios rappas8 December 2020 at 19:53

      It’s an old schematic with bc547 and bs 170 from borato as layout,, but have many problems .. I just add a booster to fix that problem and work very very well ...

      Delete
    3. fuzzhead9 December 2020 at 04:29

      Ok, I'll take look at it in a couple of days.

      Delete
  4. ZZOYD8 December 2020 at 21:47

    Hi Fuzzhead! Can i find you on FB? Or leave you email, please

    ReplyDelete
  5. Teddeeh9 December 2020 at 22:28

    Nj

    ReplyDelete

Subscribe to: Post Comments (Atom)