Saturday, 7 September 2019

DOD FX101 Grind Rectifying Overdrive

*Edit  2019-09-12* 
Now verified. After spotting an error in the schematic, Rumble control acts as it should.
Also found out that different tapers for Fear and Burn controls gives a better feel, see notes under the layout.


on
Labels: , ,

4 comments:

  1. Ibanez5224 May 2021 at 23:27

    Do you have the cab sim circuit

    ReplyDelete
  2. Tihs Llems26 February 2026 at 21:31

    On the layout above there is a 1 uF electrolytic right above burn 1 , where the negative connects to nothing. How is this verified?
    I assume a simple fix is to run the negative over to a ground trace to connect to?

    ReplyDelete
  3. BrianQ.27 February 2026 at 05:45

    According to the schematic on FSB, the 6.8k resistor above it connects to(G19) but the 6.8k should connect to the negative connection of that 1uF (H19) instead?

    ReplyDelete
    Replies
    1. BrianQ.27 February 2026 at 05:45

      FSB Thread: https://www.freestompboxes.org/viewtopic.php?t=12846

      Delete

Subscribe to: Post Comments (Atom)