A big thanks to Ian for sending me a couple of these PCB to trace!
This one is already verified by Chris Stelloh, thanks buddy!
A big thanks to Ian for sending me a couple of these PCB to trace!
This one is already verified by Chris Stelloh, thanks buddy!
Ok, one more layout today. This one traced by Clément who was very generous to send me the schematic.
Once again, thank you!
The cheap plastic casings fools us but Arion did some really good sounding stompboxes in the 80s and 90s. Here is a quite simple distortion unit that is supposed to be a sleeper. Earlier versions had silicon diodes as hard clippers which was switched to red LEDs later on. So I included a diode switch.
Schematic is avaiable HERE.
A J-FET amp emulator hailing back from the early 80s, quite ahead of its time. Trimpots are included to be able to bias the FETs and the 5,6k inline with the trimpots is reduced to 2,2k to be able to use a wider range of J FETs.
Schematic is avaiable HERE.
An old request. This is pretty much a Rat with an active treble control and two fixed eq gyrators making it quite bass heavy. Lots of mods can be done like a diode switch, tweaking the gyrators and the tonestack as well as tweaking the RC filter at the first gainstage.
Thanks to Ross to reminding me about this one!
Here we a have a circuit for people that just love offboard wiring. ;-) Also be prepared to use sockets to try out different transistors since this is a "reverse beta" design which can be quite finnicky and be a source of frustration.
Scheematic is avaiable HERE.
Another request by Ian.
The "Heaven within" mod is included as well as a feedback control for infinite reverb.
*edit' 220421* Layout updated and verified. Thanks Ian!
The late EH3054C version of the vintage Deluxe Big Muff. Some improvements had to be done like true bypass and common voltage refrence.
Schematic is avaiable HERE.
An op amp emulator of Mesa Boogie Mark II C+ which was used by Metallica for Master of Puppets. There is also a an eq board (which is huge!) so that one is for another post.
Schematic is avaiable HERE.
Nick Williams of Dunwich Amps take on the Buzzaround circuit. The most notable mods are the silicon transistors in the preamp section, a big muff tonestack with a recovery stage.
Schematic can be downloaded HERE.
The earliest version of the infamous HP was actually a dual silicon transistor circuit. It also had a few addons and a few big cap fifferncies compared to the later Ge/Si version. Not sure how it sounds but I guess some of might be interested to to try this one out.
The 2N3565 transistors had a quite wide gain range between 100-600 hfe so socketing might be a wise idea. I would start out withs 2N3904 or 2N5088s, just mind the pinout.
Schematic is avaiable HERE.