PedalPCB / Chuck D. Bones Suburban Decay Maniac

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Biggus Dickus

 Schematic is avaiable HERE.

Electronic Audio Experiments HD130 Preamp

 Schematic is avaiable HERE.

Guyatone PS-001 Distortion

Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Celestial Overdrive

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Celestial Screamer

 Schematic is avaiable HERE.

Southampton Pedals Ictineo Preamp/EQ

 Schematic is avaible HERE.

1776 Multiplex Delay Modulation Add-on

 A little useful modulation daughterboard for your delay circuits. Created by the one and only Chris Stelloh.

I originally made this for Ben Spinks, who verified it. It's the modulation daughterboard for the 1776 Effects Multiplex delay and it works pretty well with just about any PT2399 delay circuit. I've listed my preferred values as well as the originals from the build document. You can add a toggle between the mod depth and the delay pot to turn it off and on, but if you simply max the speed/rate knob, the modulation is no longer audible and the rate LED is static.

 

Infanem 141T Fuzz

 Schematic is avaiable HERE.

Maestro MFZT-1 Fuzztain

 Verified and drawn by Chris Stelloh!

Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Pushover Drive V1

 Schematic is avaiable HERE.

Claybridge Fuzzmaster Mk. IV

 How about an austrailian fuzz box from the late 60s?

Amazing that there is still undiscovered old circuits around...

Note that pot values and tapers are still unconfirmed but all of them is most likely 500k.

Schematic is avaiable HERE.

Electro Harmonix Bass Big Muff

 Per request. Was a bit hesistant to upload this since there are three missing cap values. But socketing some values should get you close enough. magus femar did some socketing and ended up with some values that works well. See the notes below the layout.  Note that I omitted the ferrite beads since they are overkill and I also omitted the direct output jack.

Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Thunderzone

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Mona Lisa Simpson Overdrive

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Fooh

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Voodoo Woman

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Mojito Mk. 3

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Purple Dragon Fuzz

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Muff # 49

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Chubby Sammish

 Schematic and more info can be found HERE.

PedalPCB / Chuck D. Bones Super 65

 Schematic and more info can be found HERE.

PedalPCB / Chuck D. Bones Tube Bender Deluxe

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones The Black Box

Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones CMOS Raincoat

 Schematic and more info is avaiable HERE.

Seppuku Fx/Jordan Fontaine Memory Lapse

 Another contribution by Jordan. Thanks mate!

I was playing with the Seppuku Fx Memory Loss that you had posted and made some adjustments for more versatility. The schematic we all have to work from is so sketchy I thought people might enjoy a thorough series of mods to it. 

S

First off I added a Mix control. It could probably be done better and would love to hear suggestions. 

The C Taper for Stability gives easier adjustment over where the latch up occurs in playing dynamics. 

I set values at the Filter control. The on/off/on gives a clean delay, dirty repeats and very dirty repeats. If you placed a 1u in either C2 or C3 it creates a totally nuts fuzz.

I set components around the feedback and surge control to taste. 

The increased Time pot is for longer delay times, why wouldn't we want longer delay times?!

I 86'd the switch for the LM386/Pins 1 & 8. I'm not going to use it but it wouldn't be hard for someone to wire it in.

The layout is not verified. It is the result of fixing the board I built from my original layout. 

Hopefully no one minds a few diagonal caps. 

 

 

 

 

 

 

PedalPCB 6 band EQ

 Another contribution by Jordan Fontaine!

Schematic is avaible HERE.

This on is verified and good to go.

Frost Giant Electronics Little Acid Fuzz

 

 Phew, loys of work lately so not much time for the blog and building lataely. A few people have sent me some new traces and new layouts. These will be uploaded today. First out is Little Acid Fuzz by Frost Giant Electronics.

Another Frost Giant PCB traced by Sergio. Based on the op amp version of the Little Big Muff from the late 70s. The internal Tone trimmer can easily be moved to the outside for a 2-knobber.

PedalPCB/Chuck D. Bones Yankee Screwdriver Deluxe Turbo

 Based on Skreddy Screwdriver but Mr Bones modified into quite something else...

Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Chuck's Buzzaround

 Schematic is avaiable HERE.

PedalPCB / Chuck D. Bones Spunk-O-Matic

 How about a MOSFET/Germanium Harmonic Percolator with some extra controls? And silicon/infrared diode clipping? Chuck D. Bones Spunk-O-Matic has it all...

Schematic is avaiable HERE.

Aion Fx Traynor TS-50B Bass Preamp - ON HOLD

 Schematic is avaiable HERE.

 

 

Chris Stelloh managed to squeeze in the power module mentioned in the Aion build docs. Hopefully it will solve the issues with power and noise. 

 

Aion Fx Traynor TS-50 Guitar Preamp - ON HOLD

 Schematic is avaiable HERE.

Death by Audio Black Card Fuzz Delay

 Once again, Ian Sheridan sent me another one of those DBA business card circuits to trace. 

 

 

Top Gear Treble Boost

 Schematic is avaiable HERE.

I added a "Boost" control at the end of the circuit since this thung is supposed to be quite loud. 

Cornish G-2 (2012 battery free version)

 Schematic is avaiable HERE.

OnkartGromt GromBass V1

 Schematic is avaiable HERE.

POS DT-1 Distortion