I've recently been really into an early build of a Lovepedal COT50. It would be my personal choice for a single knob drive. You might want to do a version of it Anders. The versions available are old and probably need updating. It's obviously just a modified Electra but sometimes simple is best.
Also, this might be interesting. The Mythos Golden Fleece. https://uploads.tapatalk-cdn.com/20210522/aece80f06b6e13bcb1e7f6368fda9146.jpg
Hi Fuzzhead, i tried this interesting thing. But I don't seem to get it working. First I think there's a mistake on the board, Q7 and Q8 both have their Base and Emitter connected. I might be wrong but to me it's looks on the schematic that the collector of Q7 is connected to the base of Q8 . Then my head got wrapped around with the wiring of the switches. Would it be possible to use a SPDT for Normal? Is normal switch pin 3 going both to ground (Board) and pin 4 of the bass switch ? Thanks for drawing the boards
Not enough transistors for my liking 😳😀
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteI've recently been really into an early build of a Lovepedal COT50. It would be my personal choice for a single knob drive. You might want to do a version of it Anders. The versions available are old and probably need updating. It's obviously just a modified Electra but sometimes simple is best.
ReplyDeleteAlso, this might be interesting. The Mythos Golden Fleece.
https://uploads.tapatalk-cdn.com/20210522/aece80f06b6e13bcb1e7f6368fda9146.jpg
Just a suggestion. Hope you're well.
The pot value is obscured. B100K
DeleteThese are "quickies" so I will whip them up during the weekend...
DeleteThe Highroad can be made on the same board too, plus loads of other one knob Electra based circuits. Great for quick builds and a lot of fun.
DeleteHi Fuzzhead, i tried this interesting thing. But I don't seem to get it working. First I think there's a mistake on the board, Q7 and Q8 both have their Base and Emitter connected. I might be wrong but to me it's looks on the schematic that the collector of Q7 is connected to the base of Q8 .
ReplyDeleteThen my head got wrapped around with the wiring of the switches.
Would it be possible to use a SPDT for Normal? Is normal switch pin 3 going both to ground (Board) and pin 4 of the bass switch ?
Thanks for drawing the boards