This is verified, I think!! It makes some mad, mad noises. Checking on some videos, there is a separate foot switch for the trip control, which seems to be responsible for most of the mad noise. Would there be an easy way to do this mod using the above circuit? If not, never mind - top job Fuzzhead
You could use a dpdt footswitch. Run the two "trip" wires from the board to the two center lugs of the switch. Put a 1m resistor across the bottom lugs and a jumper across the top lugs. Itd be an "all or nothing" switch.
This is verified, I think!! It makes some mad, mad noises. Checking on some videos, there is a separate foot switch for the trip control, which seems to be responsible for most of the mad noise. Would there be an easy way to do this mod using the above circuit? If not, never mind - top job Fuzzhead
ReplyDeleteYou could use a dpdt footswitch. Run the two "trip" wires from the board to the two center lugs of the switch. Put a 1m resistor across the bottom lugs and a jumper across the top lugs. Itd be an "all or nothing" switch.
DeleteThanks Ian for verifying this one too!
DeleteYes, wunderwood's suggestion seem to be a sensible solution for a "Trip" switch.
Thanks gents, will give it a go
ReplyDelete