Where does LED- go? I've gotten used to using these PCBs to wire my LED and stomp switch so now that I've got this circuit nearly complete I'm a bit confused about how to wire the switch and LED properly.
Hi there! If you are going to use the footswitch board you linked to, I think you can just omit LED+ connection in the layout (and the CLR) and just wire up 9v, ground, in and out between the layout and the footswitch PCB.
Thanks, I got it built however mine came out below unity gain so I'm boxing it up with a SHO on the output, tested it out and it sounds massive this way.
Now verified. Sounds great and is more versitale than expected. Will definitely be boxed.
ReplyDeleteWhere does LED- go? I've gotten used to using these PCBs to wire my LED and stomp switch so now that I've got this circuit nearly complete I'm a bit confused about how to wire the switch and LED properly.
ReplyDeletehttps://lovemyswitches.com/3pdt-wiring-board-pcb/
Hi there!
DeleteIf you are going to use the footswitch board you linked to, I think you can just omit LED+ connection in the layout (and the CLR) and just wire up 9v, ground, in and out between the layout and the footswitch PCB.
Thanks, I got it built however mine came out below unity gain so I'm boxing it up with a SHO on the output, tested it out and it sounds massive this way.
DeleteThis thing is amazing, used a B20K for Frequency and at 9 o clock there is a great stutter effect. Top job Fredrik and Fuzzhead!!!
ReplyDeleteYeah! Freppo is the man!
DeleteJust finished my build of this. It fired up first time and sounds epic.
ReplyDeleteI built it as it with no mods and I intend to keep it that way. This things sounds too good to tamper with.
A good range of sounds from tame to insane.
So happy with this, it's being boxed. Great work Fuzzhead, many thanks!!