Saturday 17 August 2019

Devi Ever Legend of Fuzz


9 comments:

  1. So I have recently discovered your site, and the collection of layouts is amazing... thanks! I built this, and it is not sounded right... farty and weak. I have gone through all of the usual troubleshooting - traces, pinouts, solder joints... but the weirdest thing is when I probe it, I get fuzz at the input of the circuit! How is that even possible?

    ReplyDelete
    Replies
    1. It is most likely that you still have a short,a solder bridge or a bad cut somewhere since you get fuzz at the input.

      Delete
  2. Ok... thanks for responding. But am I right that it should be clean at the input?

    ReplyDelete
    Replies
    1. Yes., that's correct. It should be identical to your bypass signal.

      Delete
    2. Thanks... I can't even figure out how it could be fuzz at the input... I'll keep poking at it.

      Delete
  3. Just built this. It's wild and fantastic.

    Thank you x

    ReplyDelete
  4. https://youtu.be/ZaJ7NsIZab0

    ReplyDelete
  5. I love it. It's so bonkers!

    ReplyDelete