I likee. Thanks for the recommend Ian. I used 109bs and 109cs as I didn’t have three c’s. Btw I’m stressed that Smallbear is dead. I may cry about it. Anyway, there are 14 cuts here not 13 and I believe the 470M should be a 470K. Also, I can’t tell what the body function does. I would assume that it adds more loose fuzzy bass. Just testing. Could be a bad connect. And thanks for the layout as always. Anders you’re a maniac.
Verified. I used BC549C's. In my experience, the tone control had limited range, so I used a C100k.
ReplyDeleteShould the pinout for Q1 be CBE (top to bottom)? Looks like it's lettered as a FET.
ReplyDeleteLabels fixed.
DeleteAny chance on getting a link to the schematic for this?
ReplyDeleteI likee. Thanks for the recommend Ian. I used 109bs and 109cs as I didn’t have three c’s. Btw I’m stressed that Smallbear is dead. I may cry about it. Anyway, there are 14 cuts here not 13 and I believe the 470M should be a 470K. Also, I can’t tell what the body function does. I would assume that it adds more loose fuzzy bass. Just testing. Could be a bad connect. And thanks for the layout as always. Anders you’re a maniac.
ReplyDeleteCut number and 470k resistor fixed. Thanks for the headsup!
DeleteThis comment has been removed by the author.
ReplyDelete