Hi the board is majorly correct, my build is working. There's a mistake I think with the IC1_b . There seems to be a mix up with VB+ and Vref. According to the board, +VB goes around IC2, this is also matches with the schematic. But on the board pin13 nor 14 of IC1 aren't connected to +VB. Also I swapped the 10k and 100nf coming back from fuzz2, that's the sequence in the schematic, don't know if that's changing much of the sound?
This comment has been removed by the author.
ReplyDeleteHi the board is majorly correct, my build is working. There's a mistake I think with the IC1_b . There seems to be a mix up with VB+ and Vref. According to the board, +VB goes around IC2, this is also matches with the schematic. But on the board pin13 nor 14 of IC1 aren't connected to +VB. Also I swapped the 10k and 100nf coming back from fuzz2, that's the sequence in the schematic, don't know if that's changing much of the sound?
ReplyDelete