Another contribution from Chris at CDC Fx! This layout is already VERIFIED and good to go.
Schematic is avaiable HERE and as you can see the drive section is a modified MXR Distortion+ derivate. You can yeasily tweak it to DOD 250 or countless other variations of the circuit.
Hey Anders! Thanks for posting this! One small note I would like to add for anyone building this: during my build-up, I noticed a small amount of high pitched noise that was present when I had the drive section in bypass and had the gain knob maxed. I remedied this by upping the value of the 33k resistor that goes from leg 3 of the gain pot to ground. I used 91k but a slightly lower value may work. There was still plenty of drive from the 250/Dist+ circuit after this modification.
ReplyDelete