Hi, has anyone built this? I think I'll give it a go. Question about the boost switch wiring first: how do you number the 3pdt lugs? Do you follow the same offboard wiring as Tagboardeffect does (https://tagboardeffects.blogspot.com/2012/02/offboard-wiring.html) where it goes:
1 4 7 2 5 8 3 6 9
And there's no other connections to be made to the 3pdt switch than to lugs 1, 2, 4 and 5, right? Thought I'd check first, I have built several of your layouts and used that offboard wiring scheme and they have all worked great, but this is the first with two switches...
Are you sure about this layout? Compared to the schematic at https://www.freestompboxes.org/viewtopic.php?t=32647 which was validated by Paul Cochrane himself, bass 1&3, boost 1&3 are flipped. More importantly, the FSB layout has the 1.5k resistor located between treble 2 and IC 1, whereas it it between treble 1 and IC5 here.
Looking forward to trying this one. There's a brand new Tim out now with a high cut toggle. Might be worth adding if the values are ever revealed.
ReplyDeleteHi, has anyone built this? I think I'll give it a go. Question about the boost switch wiring first: how do you number the 3pdt lugs? Do you follow the same offboard wiring as Tagboardeffect does (https://tagboardeffects.blogspot.com/2012/02/offboard-wiring.html) where it goes:
ReplyDelete1 4 7
2 5 8
3 6 9
And there's no other connections to be made to the 3pdt switch than to lugs 1, 2, 4 and 5, right? Thought I'd check first, I have built several of your layouts and used that offboard wiring scheme and they have all worked great, but this is the first with two switches...
I can reply to my own comment - yes this was correct :-) I built it and everything works so you can tag it as verified!
DeleteGreat pedal by the way. Of course reminds of the Timmy (which is a good thing) but has its own flavour.
Thanks a lot!
DeleteTagged.
Are you sure about this layout? Compared to the schematic at https://www.freestompboxes.org/viewtopic.php?t=32647 which was validated by Paul Cochrane himself, bass 1&3, boost 1&3 are flipped. More importantly, the FSB layout has the 1.5k resistor located between treble 2 and IC 1, whereas it it between treble 1 and IC5 here.
ReplyDelete