A slightly modified Tubescreamer with the input buffer replaced by a SHO MOSFET booster. The Calibre control can be noisy but I guess "Crackle is OK"....
Schematic is avaiable HERE.
A slightly modified Tubescreamer with the input buffer replaced by a SHO MOSFET booster. The Calibre control can be noisy but I guess "Crackle is OK"....
Schematic is avaiable HERE.
Guess what...Tag it. NE5532, obviously. And be warned: if I see any Greer Tomahawk or Bee Electronics arround here I will show no mercy! :O) Thanks again!
ReplyDeletelol, ok I'm warned. I'll hide under my desk once I upload Tomahawk and the Bee OD...
DeleteAnyway....tagged.
...and the mojo part: BC172B.
ReplyDeleteIs it verified? I've checked some pictures and the 220nF Film capacitor seems to tantalum.. is that correct?
ReplyDeleteThe linked schematic and BOM specifies 220nF film caps. You can try tantalums but I really doubt that the sonic character with change a lot...
DeleteThanks a lot fuzzhead! I've tried both but didn't work. I'll check the connections again.
DeleteDoes the board work at all or is it the tonestack that doesn't work. Voltages could help just to locate your issues.
DeleteOh, and I forgot to answer your question. Yes, it is verified.
DeleteThis comment has been removed by the author.
Delete