So the Time pot is... interesting. I don't need the insanely long dealys it allows. I tried messing with various values and a 10k pot is too small I ended up with a 20k pot but think 25 may be better to get some long delays.
The taper is also very important, I tried linear but with the bigger values you just blow through the short useful delays right away.
The Time and Modulation pots are interactive to a degree. The longer the time AND the more modulation the more lofi/distorted the repeats will be.
The switch sends the circuit into oscillation, and would work best as a momentary footswitch not a toggle.
This can be a very normal, useful delay, and it can go into crazy territory...
I built this.....works great sounds great 👍
ReplyDeleteCheers! Tagged.
Deletecan you pls upload a video of it.
ReplyDeleteThe modulation is distorted but interesting
ReplyDeleteSo the Time pot is... interesting. I don't need the insanely long dealys it allows. I tried messing with various values and a 10k pot is too small I ended up with a 20k pot but think 25 may be better to get some long delays.
ReplyDeleteThe taper is also very important, I tried linear but with the bigger values you just blow through the short useful delays right away.
The Time and Modulation pots are interactive to a degree. The longer the time AND the more modulation the more lofi/distorted the repeats will be.
The switch sends the circuit into oscillation, and would work best as a momentary footswitch not a toggle.
This can be a very normal, useful delay, and it can go into crazy territory...
2nd update. I put a 1.2nf cap between pins 11 and 12 like some other delays have and it cured some of the distortion..
DeleteThis thing goes from almost chorus to almost reverb to insane long delays with what almost passes as modulation.
It is very fun to play with, and I think I shall rename it from workshop to Almost.. because it is almost lots of things