Wednesday, 13 November 2019

Revv G2 Pedal

 Shares the same footprint as G4 pedal but some component values is tweaked for less gain and slightly different overall eq.


on
Labels: , ,

9 comments:

  1. kramerian18 November 2019 at 16:59

    You're so fast man! where you got schemo

    before i forget, thanks for making this site. Get some interest circuit didnt know before, specially fuzz!

    request for more delay pedal, i like how veroboarder doing that

    ReplyDelete
    Replies
    1. fuzzhead25 November 2019 at 20:01

      Thanks! Schematic is avaiable PedalPCB forum.

      I will try to do some delay layouts for sure but I prefer to not do layouts for circuits I don't understand and I'm not there with delays yet...

      Delete
  2. Unknown13 June 2020 at 00:34

    Verified:mod,220k instead of 22k pin1-ic2 for more gain

    ReplyDelete
  3. Unknown29 June 2020 at 00:42

    Simple but interesting modification: omit clipping leds

    ReplyDelete
  4. Unknown29 June 2020 at 16:21

    So mine:a single 5m/m blue led for clipping on diffused light on/on switch,oriented with + upwards.Ic1 tl062.

    ReplyDelete
  5. Unknown29 June 2020 at 16:31

    Even better a single 5m/m red led ultrabright.

    ReplyDelete
  6. TedS28 September 2022 at 17:52

    This comment has been removed by the author.

    ReplyDelete
    Replies
    1. TedS29 September 2022 at 02:15

      Disregard. This idiot wired up the switch wrong and it made things much better when I did it right....

      Delete

Subscribe to: Post Comments (Atom)