For the 1P7T rotary...it will work if it has a locking ring under the washer so you can lock it into 5 throws.
For the numbers...do you have acces to the datasheet of your switch? It usually helps. The other way would be to identify the switch setting / lug numbering using a DMM across the pole and the outer lugs.
Hi Anders, built this but get oscillation on positions 3 and 4. Can't for the life of me figure out why. Checked against the mojo layout and the only change I can see is the 1M resistor, could this be the culprit? Cheers mate
Hey I have got a 1p 7pos rotary switch will that work?Also is there a guide that shows what the lug numbers are
ReplyDeleteFor the 1P7T rotary...it will work if it has a locking ring under the washer so you can lock it into 5 throws.
DeleteFor the numbers...do you have acces to the datasheet of your switch? It usually helps. The other way would be to identify the switch setting / lug numbering using a DMM across the pole and the outer lugs.
Thanks Fuzzhead for the point in the right direction
ReplyDeleteHi Anders, built this but get oscillation on positions 3 and 4. Can't for the life of me figure out why. Checked against the mojo layout and the only change I can see is the 1M resistor, could this be the culprit? Cheers mate
ReplyDeleteSorted, had used 2n2222's but the hfe was too high. Changed to MPSA05's and it works perfect. Nice sounding pedal!!!
ReplyDeleteGreat, glad you sorted it out.
Delete