Yes it will work. But a more simple sollution would be to use normal power with 2N5088 transistors. If doing so, you have to flip around all electrolyctic capacitors and D5.
I flipped the polarity and used 5088’s. If you do, don’t forget to also flip the power protection diode. The PNP version sounded a bit fizzy. NPN sounds pretty good. Thanks
Hello ... how to make positive ground and the current negative ? Best regards
ReplyDeletehttps://www.sabrotone.com/wp-content/uploads/2011/01/Charge-pump.gif
DeleteI found this , do work ?
Yes it will work. But a more simple sollution would be to use normal power with 2N5088 transistors. If doing so, you have to flip around all electrolyctic capacitors and D5.
DeleteThat’s is better I think . So the q1-q4 are 2n5088 . the Schottky diode flip and the el. Caps .. but the sound is the same or out of big muff?
DeleteYes, it should sound the same since 2N5088's is NPN analouges to 2N5087.
DeleteAnd the 2n5088 stay as the same In board - COLLECTOR BASE EMITTER.?
DeleteYes, pinout is the same.
DeleteThanx for everything fuzzhead ... king regards
ReplyDeleteI flipped the polarity and used 5088’s. If you do, don’t forget to also flip the power protection diode. The PNP version sounded a bit fizzy. NPN sounds pretty good. Thanks
ReplyDelete