Wampler Talent Booster

 Schematic is avaiable HERE.

Lovepedal Les Luis w. Twill Deluxe mods

 A contribution from Chris Stelloh...thanks buddy!

Empress Effects Distortion

 Schematic is avaiable HERE.

Zeibek ElectroniX Submarine Bass Guitar Preamp

 Schematic is avaiable HERE.

Fender The Trapper Dual Fuzz

 Schematic is avaiable HERE.

Fender Hammertone Overdrive

 Schematic is avaiable HERE.

Demonic Machines Dragonaut

 Schematic is avaiable HERE.

Demonic Machines Fishbones

 Schematic and a small writeup is avaiable HERE.

Adventure Audio Fuzz Peaks V2

 Schematic can be found HERE.

One Control / BJF Anodized Brown Distortion 4K

 So....I'm back. Decided to take screen detox for a while.The backlog of layouts is quite big at the moment so you can expect plenty of them the next coming days. 

I'll wil go through the blog comments for verifications but I'm sure I will miss some so don't hesitate to give a shout out if there is something I've missed...

First out is One Control Anodized Brown Distortion, Björn Juhl's take on a "Brown-Sound-In-A-Box". As usual there are some intereting design quirks here, most notable being the J FET gyrator ( which runs on 5v, hence the voltage regulator) for the Mid control and the RC filter in parallel with the hard clipping section. The schematic can be found HERE

Cornish P-1

 Schematic is avaiable HERE.

Madbean Splunker

 Schematic and info is avaiable HERE.

Capitalist Death Cult Just. Give. Up. V2

 Another contribution by Chris. This time he made some improvements and addons on a rare and wild Death by Audio circuit. Tone houndz...stay away!

 Chris says:

I don't know if this warrants its own post but I wanted to show it to you anyway since I was the one who verified your purple card drawing.

Since I built that up I wasn't happy with the bleed through in bypass that sometimes happens with the LM567. So I used the old "millennium bypass" trick of adding a mosfet to handle the LED switching so that you can use only a DPDT for true bypass with an indicator light. THEN I used the now-vacant set of poles on a 3PDT to connect/disconnect the power supply to the LM567 when the circuit is bypassed. So NO NOISE! I also added the master volume, because if ANY circuit needs it, it is this loud beast. Then I put the frequency pot (which I cut down to 10k) on a switched expression jack so that you can get foot-controlled crazy pitch-wah sounds with a standard TRS expression pedal like an inexpensive m-audio or nektar controller. Anything more than 15-20k of resistance for the frequency control just takes you into slower and slower chopped/tremolo territory. And the 10k pot still allows for some of that in the toe up/CCW position and all of the pitch control as you turn the knob up/put the treadle down.

 

 I added a toggle to change the resistance on the frequency sweep - this allows for a low range and high range mode on the frequency. Since most expression pedals have 10k pots, I wanted to keep the frequency pot at 10k too so that the sweep matches whether you are using the knob or an exp pedal.

 

 

Ramble FX Twin Bender

 Schematic is avaiable HERE.

EMMA ReezaFRATzitz FR1

 Schematic is avaiable HERE.

Thorpy Fx Have Blue Ge Boost

 Schematic is avaiable HERE.

OKKO Holy Grit

 Schematic is avaiable HERE.

Barber BUSS

 Schematic is avaiable HERE.

Madbean Florist

 Schematic is avaiable HERE.

Catalinbread Epoch Bias

 Schematic is avaiable HERE.