Friday, 29 August 2025

Exar TB-04 Tuber

 Schematic is avaiable HERE.


 

on
Labels: , ,

9 comments:

  1. Andy30 August 2025 at 00:29

    Hello, how are you? Could you make a tagboard for Roger Mayer Stone Fuzz?

    ReplyDelete
    Replies
    1. fuzzhead30 August 2025 at 08:53

      For sure! I just need to dig up the correct schematic...

      Delete
    2. Andy30 August 2025 at 16:56

      Yes, I found very little information about this stonefuzz...
      thank you for the dirtboxlayouts website! I have a lot of fun with your tagboards ✌️🎶

      Delete
    3. Andy30 August 2025 at 17:02

      https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiiaZE5JmKPb0utP1mzUqNfo1A4YQ3sesZn3eCFBL3gDhkJeDO4HZzFXe73q23CRvFDR6FoPaZMPlSlFVM1D7b86fcO22CcnINs1ux-C2rekPvVVp8fnjPY-J-CC-xmQ0jh8zhjEQzN5tQ/s1600/RogerMayer_StoneFuzz.gif

      Delete
    4. BrianQ.1 September 2025 at 18:27

      This comment has been removed by the author.

      Delete
    5. BrianQ.1 September 2025 at 18:34

      I have the pedal, it’s just a modified Fuzzface with silicon pnp transistors, a trimpot feeding Q1 & a resistor forming a low pass filter at the input. You could build it on one of the Fuzzface layouts that are on here?

      Delete
    6. Andy2 September 2025 at 15:54

      Hello, how are you? Can you measure voltages at Q1 and Q2?

      Delete
    7. BrianQ.2 September 2025 at 17:04

      Start at 4.5v & adjust more or less for the best sound?

      Delete
    8. Tom2 September 2025 at 22:39

      Remembered someone was looking for this. Scroll down and you'll find a layout,
      https://www.freestompboxes.org/viewtopic.php?t=14776

      Delete

Subscribe to: Post Comments (Atom)