Tuesday, 21 November 2023

Vemuram Karen

 Schematic is avaiable HERE.



8 comments:

  1. Oh man, sh%t just got real......might have to start on this after the turkey is done digesting.

    ReplyDelete
  2. Hi Anders, the link to the schematic is not working. Looks familiar, though. Keep up with the good work!

    ReplyDelete
    Replies
    1. https://web.archive.org/web/20240704231805/https://blog-imgs-166-origin.fc2.com/d/r/u/drugscore/09_326_02_vemuram_karen_schematic.png

      Delete
  3. you can call this verified. I used a 1.5M resistor in place of the trimmer, across where the top and right lugs would be, and a couple 1n914's until i get ahold of the 2m trimpot and BAT85's.
    Sounds pretty good though....definitely not $400 good lol thanks for posting this one...and thanks for all of this, keeps me from doing much worse things with my time.

    i've had my fingers crossed that one day the Vemuram Shanks schem will pop up. Been holding off on building an ODR-1 in hopes that it eventually makes an appearance...mainly because Tim Peirce makes it sound so damn tasty lol

    ReplyDelete
  4. now that i had a chance to crank it up for a bit, its a really thick juicy marshally sound. Great for the medium to heavier stuff but it doesnt seem to clean up well when rolling back on the guitars volume.

    ReplyDelete
  5. does the drive knob work? Mine does not do much. I cannot find the schematics as the link is broken

    ReplyDelete
    Replies
    1. no worries is like the original, change a little bit using the trimmer

      Delete
    2. https://web.archive.org/web/20240704231805/https://blog-imgs-166-origin.fc2.com/d/r/u/drugscore/09_326_02_vemuram_karen_schematic.png

      Delete