Tobias from the band Green Orbit have traced a few pedals from a now obsolete producer called Black Effect Pedals. They were producing mostly fuzzes on the heavier end of the scale, suited for doom and stoner toanz.
Lava Machine is based on Univox Unidrive with some tweaks and addons. Two onboard trimpots to tune in bias and the input signal, The gain control affect the negative feedback between the output buffer and input transistor and it has a treble cut tone control. According to Tobias it does boost, overdrive and fuzztone really well by using your guitar volume control.
elco 47u below 100u need to GND, not connect with clr
ReplyDeletecmiiw
Thanks! Layout is updated.
DeleteHello ,do you have a schematic for this one? built it but something isn't quite right.Thanks
ReplyDeleteI'll ask the tracer for permission to upload the schematic here.
DeleteThe schematic is now attached to the post.
DeleteGREAT FRIEND, THANK YOU
ReplyDeleteJust built this. You can tag it. Sounds great!
ReplyDeletePut the input trimmer as a B10k pot. Might do the same with the Bias trimmer because it is handy for going from velcro spit to full almost muff fuzz.
Thanks! Ill tag it right away.
Delete