A DIY classic by Runofgroove. It is a Big Muff but the transistors is replaced with hex inverters.
Schematic and more info HERE.
A DIY classic by Runofgroove. It is a Big Muff but the transistors is replaced with hex inverters.
Schematic and more info HERE.
Fired Right up! Sounds and acts just like a Big Muff. Only thing
ReplyDeleteI noticed was that the circuit only reaches unity with volume maxed. Any idea which resistors or caps i can change to get more volume?? Thanks as always!
Thanks for verifying!
DeleteFor more volume, you can experiment with the 330k resistor at collumn 13. You can try a larger value but you might end up with more gain and possibly more noise.
I added a 100nf cap and a 33k resistor between pins 10 & 11 according to the schematic & it works great
ReplyDeleteIs that not them down by the diodes?
DeleteThis comment has been removed by the author.
ReplyDeleteThis wasn't good for me...very quiet and had a bad oscillation/hum at full gain. ☹️
ReplyDelete