Here we have a "little" monster layout for a DIY project that Dunwich Amplification just released at OSH Park. It is supposed to a emulate a part Al Cisneros of Sleep bass rig. It is basically three circuits in parallell, a DOD 250 Pre Amp, a Boss DS1 and a clean J FET boost with a James tonestack.
Schematic and BOM can be downloaded HERE.
If you verify the design, let me know. I had a Rev1 I built years ago but this is a Rev2 I did not build. So now as a DIY I have one person who is doing the verification of the PCB I have on OSH but its not only the PCB verify but also the design verify so even on vero the design verify is worth my time.
ReplyDeleteSure, I'll let you know if I build it and verifies it. But some of the bass players following the blog might verify before I do since I'm planning to build your HM2 clone with clean blend first.
DeleteVery cool DIY projects you have released, a big thank you! I'm also very tempted to build the Apostle as well.
Your take on a Boss FZ2 would be cool to see as well:-)
Unfortunately those are still being built by Magic Pedals so I will not be releasing a DIY version of that at this time.
DeleteAh, didn't know that. Totally understanable.
Delete@new05002, Just curious, Has the OSHpark version been verified yet?
ReplyDelete