Sunday, 28 June 2020

Mad Professor Simble Overdrive




16 comments:

  1. I hope you know that I keep this page bookmarked in my browser and refresh almost daily to see what's new. I really appreciate the amount of content you put out! Keep up the great work!

    ReplyDelete
  2. This can be tagged as verified!
    One of the best overdrives ever in my opinion. For the opamp I used TLC2262, works also great.

    ReplyDelete
  3. Just finished it... very nice

    ReplyDelete
    Replies
    1. I used a TLC2272cp fwiw. sounds good, gets nice and crunchy and the contour/accent controls are very interactive... if a not a little confusing at first.

      Delete
  4. I am counting 11 links instead of 12? Did I miss one? ^^

    ReplyDelete
    Replies
    1. No you didn't.:-) 11 links it is.

      Delete
    2. Thx fuzzhead, starting right away ;)

      Delete
    3. Just build it, sounds great! Thanks for the layout! Any chance for a layout of the Royal Blue overdrive #daretoask

      Delete
    4. Nice!
      Royal Blue OD...no schematic on the web so we got to wait until it is traced...:-/

      Delete
    5. That's too bad Fuzzhead. I do have a gutshot for you of my own Paul Cochrane Timmy 2017 (v2). The values are slightly different from the tagboardeffects layout as far as I can tell.

      Delete
    6. I don't have a Timmy layout yet. Got to check out some schematics. So there are several versions of it?

      In the meantime, almost finished with a layout for Greer Southland OD which is related to Lightspeed...sounds interesting?

      Delete
    7. Yeah there are 3 versions, v3 got rid of the ‘counterclockwise’ tone controls. I’ll take A look at the Southland, thx!

      Delete
  5. built it - boxed it - love it !
    Great sounding Pedal.

    Thank you @fuzzhead for the Layout and all the effort you put into this site !

    ReplyDelete
  6. Hello!
    I've finished it, but it sounds strange. I have a lot of clean signal mixed with some distorted one. This is how it sounds?
    Looking at the schematic, the 100nF from the second half op amp loop seems to be too big. I never saw one bigger than 4.7nF in that position. Anyone knows if it's OK?

    ReplyDelete