Monday, 30 March 2020

Seymour Duncan Pickup Booster



 


As you can see there is lots of odd resistor values so here is a layout with closest more common values.





on
Labels: , ,

15 comments:

  1. Teddeeh1 April 2020 at 11:06

    You legend. Im almost done resorting my workspace. Will give this a burn asap.
    I do have another request- the byoc 855 tubescreamer.
    For some reason atm, im going for a george lynch setup haha

    ReplyDelete
    Replies
    1. fuzzhead1 April 2020 at 18:32

      Sounds good, quite curious about this one myself.

      BYOC 855 OD is identical to this:
      https://dirtboxlayouts.blogspot.com/2019/07/ibanez-od-855.html

      Delete
  2. H.A.4 December 2021 at 22:24

    Build it today. Weird. The filter section work but it does not do any boost. Double check the layout and the schematic and my build but I'm not able to spot any error. Bummer.

    ReplyDelete
    Replies
    1. Boukman5 March 2022 at 11:47

      This comment has been removed by the author.

      Delete
    2. Boukman5 March 2022 at 11:49

      This comment has been removed by the author.

      Delete
    3. Boukman5 March 2022 at 18:01

      Hi!I have the same..Did you find what`s the problem?

      Delete
  3. Boukman5 March 2022 at 15:40

    Hi!I built it today but i get no boost with the pot and i cannot hear the filter switch at all..I placed the input on the board right next to res sw 2 pad..The sound is exactly the same as bypassed.I used to 2n5088 as q1 and q2.I don`t know what`s wrong..

    ReplyDelete
    Replies
    1. Boukman5 March 2022 at 17:58

      I can hear the filter a bit...but no boost

      Delete
    2. fuzzhead5 March 2022 at 21:44

      Uh oh, the schematic has dissapeared from PedalPCB. I guess I will go through the layout without it but I canät promise I can spot any errors if there is any.:-/

      Delete
    3. Boukman6 March 2022 at 08:24

      Hi man!!Here you go:
      https://aionfx.com/app/files/docs/photon_documentation.pdf
      I cannot spot anything..Weird..Thanks!!

      Delete
    4. fuzzhead6 March 2022 at 11:07

      Great!
      I'll take a look thi evening.

      Delete
    5. Boukman6 March 2022 at 11:57

      Thanks a lot man!!

      Delete
    6. Boukman7 March 2022 at 15:31

      Hey!Any news?Did you find anything?Cheers!

      Delete
    7. fuzzhead7 March 2022 at 16:51

      For a start, you need a cut a H14.

      Delete
    8. Boukman7 March 2022 at 18:28

      Ok that was it!!Now it works perfectly i think!!Thanks!!!

      Delete

Subscribe to: Post Comments (Atom)