Yes, I will add it once I get hold of a schematic for it. While it is likely that it has the Voice ctrl from Zen Drive, I would like to have it confirmed before uploading it.
Just saw a GreyBench vid on this. He seemed to think the voice knob was from the Zen too. Same circuit board as the original Zen so it probably does make sense.
From everything I've read, it is the same voice knob as on the Zendrive. Honestly, from what I've gathered, to get the same thing for the Mosferatu, you can take the Zendrive layout from here and mod it a little bit. Remove the single 1N34A, and replace it with a wire jumper. Then replace the BAT41's with 1N34A's. That's basically it. Some people swear the 25k Tone pot is good, I prefer the 50k Tone pot for my Mosferatu builds (like in the zen drives).
Ground?...
ReplyDeleteOne row below "input" connection
DeleteThanks. It confirms my suspicions...
ReplyDeleteAny chance of the 4 knob version? Pretty sure it just uses the voice knob from the Zendrive.
ReplyDeleteYes, I will add it once I get hold of a schematic for it. While it is likely that it has the Voice ctrl from Zen Drive, I would like to have it confirmed before uploading it.
DeleteJust saw a GreyBench vid on this. He seemed to think the voice knob was from the Zen too. Same circuit board as the original Zen so it probably does make sense.
DeleteFrom everything I've read, it is the same voice knob as on the Zendrive. Honestly, from what I've gathered, to get the same thing for the Mosferatu, you can take the Zendrive layout from here and mod it a little bit. Remove the single 1N34A, and replace it with a wire jumper. Then replace the BAT41's with 1N34A's. That's basically it. Some people swear the 25k Tone pot is good, I prefer the 50k Tone pot for my Mosferatu builds (like in the zen drives).
DeleteVerified. Thanks man
ReplyDeleteAm I counting 14 cuts?
ReplyDeleteYes.
DeleteThought so!
DeleteWires 1 and 3 on the gain pot need flipping 👍
ReplyDeleteThis is quite a nice classy overdrive
https://youtu.be/yMiGM26ocsE
ReplyDelete